Products DescriptionMini Voice Recorder Turn On / Off: Press the “Turn on/off” button about 2 seconds,the indicator light becomes red and it means the recorder is turned on. Press it again about 2 seconds,the recorder turns off. USB Connection: In the state of the shutdown,please connect the recorder to PC or the mobile device which with the OTG function.The recorder can be used as the removable disk and start charging,when the red indicator light keep flashing ,it means the charging is not finished,and vice versa. It will need about 1 hour when charging by PC.And the recorder can continuous recording about 13 hours after fully charged. Note: If the red indicator light flashes during recording,it means the power is not enough.Please connect it to PC,phone or charger,it will be recording and charging simultaneously.   Voice Recording ❶ ❷ Press the "Mode" button while recording voice to switch to the Voice Activated Recording(VOS). ❸ The recorder will automatically save the recording files after four hours continuous recording,and then start to record the next file.  Operations The recorder enters into standby state after booting on, the red indicator light is always bright. Playback Press the “Turn on/off” button after turn on the device, it will start playback.Press the "Mode" button to switch from Music to Recording files. In the state of playback, short press "Forward / Backward" button to adjust the Volume ,and long press the button to fast forward or backward. Press the “Turn on/off” button to pause playback. In the state of pause playback ,short press “Forward/Backward” button to next one or previous. Time Setting Please connect the recorder to the PC and create a “txt” file under the folder RECORD,then save it.(The format and the content of the file should include the date and time.).Please make sure the “year” must be four digits and the others be two digits.such as 20180117103030 (It means in Jan. 17th 2018 at 10:30'30''). USB Connection 1 In the state of the shutdown,please connect the recorder to PC or the mobile device which with the OTG function.The recorder can be used as the removable disk and start charging,when the red indicator light keep flashing ,it means the charging is not finished,and vice versa. USB Connection 2 It will need about 1 hour when charging by PC.And the recorder can continuous recording about 13 hours after fully charged. Note: If the red indicator light flashes during recording,it means the power is not enough.Please connect it to PC,phone or charger,it will be recording and charging simultaneously.
ReviewCustomers who bought this product also purchased... |
