Products Description
Selling point of the product :
1. 1.2G wireless camera with receiver ;
2. 30 IR LED ;
3. Night vision function .
Fuctions:
Visitor Identifying,Home Security, Moving Detection,Entry Detection,Baby and Patient Tending.
Wireless transmission and reception.
Send and Receive pictures through walls with high resolution.
Small and Light Weight.
Lower Power Consumption.
High Sensitivity.
Easy 1-Minute Installation.
Easy to Operate.
Audio and vedio recording.
Spcifications:
Frequency: 1.2G
Resolution :380TV Lines
Linear Transmission Distance :50M (20 metres through obstacles)
Weatherproof:Yes
Minimum Illumination :0 LUX
Infra Red LEDs: 30
Night Vision Range: 15 metres (Total Darkness)
Camera Lens:6mm
Viewing Angle;56 degrees
Camera Size :40mm Diameter(better than 45mm)
Dimensions:5.5cm x 4.0cm x 4.0cm
Image pickup device : 1/4" Image Sensors
Effective Pixel :PAL : 628X582
TV system :PAL / CCIR
Transmission Signal :Video
Output Power :50mW
Instruction:
1. Twist the receive antenna into the receiver
2. Connect the receiver to the monitor (TV, Video, PC) with AV cable
3. Plug the DC 12V 500mA adaptor into the power jack of the receiver
4. Insert the second DC 9V 500mA adaptor or the 9V Battery (not included) via the leads
into the power jack of camera
5. Adjust the frequency controller on the receiver to the required position
6. Adjust the lens of the camera to the best position, then mount the camera.
Package:
Complete Instructions
Colour Camera and built-in transmitter
Receiver with antenna
Adaptor for Camera & Receiver (according to the buyer country)
RCA Cable to connect Receiver to the TV / Video / Computer
Wireless 1.2Ghz camera
1. Frequency: 1.2G
2. Resolution TV cable
3. Linear transmission distance: 20M (10 meters through obstacles) 4.
Weather resistance: yes
5. Minimum illumination: 3 LUX
6. Infrared LED: 30
7. Night vision range: 10 meters (all black)
8. Camera lens: 6 mm
9.Dimensions: 5.7*5cm
10. Image pickup device: 1/3, 1/4" image sensor
11.TV system: PAL/CCIR: 50Hz NTSC/EIA: 60Hz
12. Transmission signal: video
13. Output power: 50mW
receiver
1. Power supply: DC12V 1A
2. Current consumption: 200 mA
3. Demodulation type: FM
4. Frequency: ISM 900 MHz-1200 MHz
5. IF: 480 MHz 6. Antenna: 50 ohm F-type connector
7. Receive sensitivity: <-75 dBm
Package contents:
1 x Wireless Camera
1 x Wireless Receiver
1 x A/V Cables,
1 x Receiver
1 x12v Power Adapter
1 x User manual
     
ReviewCustomers who bought this product also purchased... |
